Distributions to paid-in capital (DPI)

Also called the realization multiple.

Metrics and finance8min read

In finance, distributions to paid-in capital (DPI) measures the value a fund has distributed to its investors divided by the capital they have contributed. It shows what investors have received, rather than the estimated value of investments the fund still owns.

DPI has other meanings: disposable personal income in economics, and dots per inch in printing and imaging. This page covers its use in private equity and venture capital.

Key takeaways

  • DPI uses paid-in capital, not the total amount investors have committed to a fund.
  • A DPI of 0.5x means investors have received $0.50 in distributions for every $1 contributed.
  • Unsold investments do not count toward DPI. They appear in residual value and total value metrics.
  • Distributions can include stock, not just cash. Check the breakdown before treating DPI as money investors have banked.
  • For founders, an investor's DPI can help explain its appetite for exits, but it does not determine your company's valuation or your personal payout.

How DPI works

The formula is:

DPI = cumulative distributions to investors ÷ cumulative paid-in capital

Both figures must cover the same investors and run through the same reporting date.

In a venture fund, investors are usually limited partners, or LPs. They commit capital, and the fund manager calls that capital over time. A $100 million fund does not necessarily have $100 million paid in.

For example, an LP might commit $5 million but have contributed only $3 million so far. The denominator for that LP's DPI is $3 million, not $5 million.

For net LP reporting, paid-in capital includes contributions used to pay fund fees and expenses. Distributions are amounts allocated to LPs under the fund's terms, rather than the gross proceeds from selling portfolio companies. A company exit does not increase DPI until the fund makes a distribution.

Three details matter:

  • A DPI of 1.0x means distributed value equals contributed capital. It says nothing about how long that took.
  • Remaining investments are excluded. A fund can have low DPI and valuable unsold holdings.
  • Stock distributed to LPs can count at its distribution value. The amount an LP later receives from selling that stock can differ.

DPI measures distributions, not their source. Proceeds from an exit and proceeds from fund borrowing can both support a distribution, but they tell different stories about investment performance.

A fund returns $40 million on $80 million contributed

Consider a hypothetical venture fund at one reporting date. All figures are in US dollars and use the LPs' perspective.

ItemAmountTreatment
Total commitments$100 millionNot the DPI denominator
Capital contributed by LPs$80 millionDPI denominator, including contributions for fees and expenses
Cumulative distributions to LPs$40 millionDPI numerator
Remaining net asset value attributable to LPs$100 millionExcluded from DPI

The arithmetic is:

DPI = $40 million ÷ $80 million = 0.5x

The LPs have received half as much as they contributed. That does not mean the fund has lost half their money: it still reports $100 million of remaining value.

Two companion metrics show that distinction:

MetricCalculationResult
DPI$40 million distributed ÷ $80 million paid in0.5x
RVPI, residual value to paid-in capital$100 million remaining value ÷ $80 million paid in1.25x
TVPI, total value to paid-in capital($40 million + $100 million) ÷ $80 million1.75x

On a consistent reporting basis:

TVPI = DPI + RVPI

Here, 1.75x = 0.5x + 1.25x.

The fund reports total value above contributed capital, but most of that value remains in unsold investments. Those valuations can rise or fall before an exit. The 0.5x DPI is the distributed portion, not a forecast of the final return.

What a company exit does to fund DPI and founder proceeds

Now consider one company in that fund's portfolio. It sells for $50 million of equity proceeds available to shareholders.

For this example, the founder owns 30%, the fund owns 20%, and other shareholders own 50%. All shares participate pro rata. There are no preference differences or transaction costs affecting the split.

ShareholderOwnershipSale proceeds
Founder30%$15 million
Venture fund20%$10 million
Other shareholders50%$25 million
Total100%$50 million

The fund then distributes its entire $10 million to LPs. Ignore any fees or carried-interest withholding triggered by this sale, and keep paid-in capital unchanged.

Its new DPI is:

($40 million previously distributed + $10 million new distribution) ÷ $80 million paid in = 0.625x

The founder receives $15 million before personal taxes. The fund's DPI moves from 0.5x to 0.625x. These are different outcomes measured at different levels.

In a real exit, liquidation preferences, debt, transaction costs and the capitalization table determine the founder's proceeds. The fund's distribution waterfall then determines how its proceeds are shared between LPs and the manager.

This explains why DPI comes up in founder-investor conversations. An exit that feels small to a founder can still provide a useful distribution for a fund. Conversely, a large company sale might barely move DPI for a much larger fund.

Ask a prospective investor which fund will write the check, how far it is into its life, and what follow-on support it can provide. A predecessor fund's strong DPI does not establish that the current fund has money available.

What the reporting documents say

The Institutional Limited Partners Association's Performance Template provides a standardized framework for reporting private-fund performance. Its cash-flow and valuation information helps LPs distinguish distributed proceeds from remaining value.

A DPI figure should therefore be traceable to contributions and distributions. It should not depend on a manager's estimate of what an unsold company could fetch.

The underlying payment rules sit elsewhere. ILPA's whole-of-fund Model Limited Partnership Agreement addresses capital contributions and distributions, including the waterfall that allocates proceeds between LPs and the general partner.

The distinction matters:

  • A performance report describes what has happened.
  • The limited partnership agreement governs obligations and allocations.
  • A startup's financing documents govern the investor's rights in that company.

DPI itself is not a contractual promise to return a particular multiple. Nor does a fund reporting 1.0x DPI automatically mean its LPs have no remaining commitments or recall obligations.

When reviewing a report, identify the reporting date, investor group, treatment of fees and carry, and any adjustments for recalled or recycled capital.

What is normal, and what should you question?

There is no universal "good DPI" that works across fund ages and strategies. Compare funds raised around the same period, with similar strategies, using consistent reporting dates and calculation methods.

A young venture fund can have little DPI because its companies have not exited. An older fund with low DPI deserves a different conversation: what remains, how credible are those valuations, and what could produce liquidity?

Question these presentations:

PresentationWhat to ask
"We've returned the fund"Does that mean distributions equal LP contributions, or gross exit proceeds equal the fund's stated size?
A high multiple without a labelIs this DPI, TVPI or an individual investment's return?
Distributions described entirely as cashWere any shares distributed in kind?
A rising DPI without major exitsDid borrowing finance distributions?
A comparison against much younger fundsAre vintage years and reporting dates comparable?
A return figure described as netWhich fees, expenses and carried interest are included?

Borrowing deserves attention. ILPA's guidance on NAV-based facilities discusses their use to support distributions and the need for transparency. A debt-funded distribution raises DPI, but it also leaves an obligation inside the fund. It is not equivalent to selling an investment at a profit.

DPI versus TVPI, RVPI and IRR

MetricWhat it measuresMain limitation
DPIDistributed value divided by paid-in capitalExcludes remaining investments and ignores timing
RVPIRemaining net asset value divided by paid-in capitalDepends on valuations of unsold holdings
TVPIDistributed value plus remaining value, divided by paid-in capitalCombines distributions with valuation estimates
IRRAn annualized return based on the timing of cash flows and remaining valueSensitive to cash-flow timing and interim valuations

DPI and IRR answer different questions. Returning contributed capital after a short holding period is not the same economic outcome as returning it after many years, even though both can produce 1.0x DPI.

For an unfinished fund, read the metrics together. DPI shows distributions, RVPI shows what remains, and IRR adds the timing dimension.

Questions founders ask

What does DPI mean in finance?

DPI means distributions to paid-in capital. It is used in private-fund reporting to compare cumulative distributions to investors with their cumulative contributions. It is a multiple, not an annual return or a measure of the startup's operating performance.

What is the acronym DPI?

The expansion depends on context. In private equity and venture capital, it means distributions to paid-in capital. In economic data, it can mean disposable personal income, which the US Bureau of Economic Analysis defines as personal income less personal current taxes. In printing and imaging, it means dots per inch.

What does DPI stand for in banking?

In a private bank's report about a venture or private equity fund, it can mean distributions to paid-in capital. Do not assume that expansion applies to every banking document. Check the report's glossary and whether the figure is presented as a fund-performance multiple.

Can DPI go down?

Yes. If a fund calls more capital without making another distribution, the denominator rises while the numerator stays unchanged. Recallable distributions and recycled capital also require care: inspect the reporting policy rather than assuming every published DPI treats those flows identically.

Does an investor's high DPI make it a better choice for my startup?

It is evidence about distributions from the fund being measured, not a complete assessment of the investor. Identify which funds and deals produced those distributions. Then assess the partner, investment stage, ownership expectations and ability to support your company. A manager's past liquidity record does not settle those questions.

Related terms

Sources

  1. Institutional Limited Partners Association, "Performance Template", January 2025.
  2. CFA Institute, "GIPS Standards Handbook for Firms".
  3. Institutional Limited Partners Association, "Model Limited Partnership Agreement", whole-of-fund model, 2019.
  4. Institutional Limited Partners Association, "NAV-Based Facilities: Guidance for Limited Partners and General Partners", July 2024.
  5. US Bureau of Economic Analysis, "Disposable Personal Income (DPI)", glossary.